เจ้าของร้านค้านี้ ไม่ได้เข้าสู่ระบบเป็นระยะเวลา 156 วัน แล้ว
ไฮไลท์
Cooled vacuum oven VOcool
Low-temperature vacuum drying enables pharmaceutical or food labs to gently dry bacteria and starter cultures in the cooled vacuum oven VOcool. Furthermore programme-controlled storage and transport scenarios for determining the behaviour of active ingredients or volumes at different pressure and temperature conditions can be simulated.
ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า
  • Temperature range +5 up to +90 ℃
  • 2 model sizes (29 and 49 litres volume)
  • 1 model variant: TwinDISPLAY

Outstanding precision thanks to Peltier technology
Maximum time-savings thanks to vacuum cycles
A Memmert vacuum drying oven offers unique advantages

Cooled vacuum oven VO29cool
For gentle drying of bacteria and starter cultures or simulation of intercontinental flights.

Temperature

Working temperature range from 5°C (at least 20 below ambient temperature) to +90°C
Setting temperature range from +5°C up to +90°C
resolution of display for actual values 0.1°C
resolution of display for setpoint values 0,1°C

Pressure (Vacuum)

Vacuum range 5 to 1100 mbar
Pressure control Digital electronic pressure control for a speed-controlled vacuum pump. Tubing for vacuum, air and inert gas are made of material 1.4571 (ASTM 316 Ti). Programmable, digitally controlled inlet for air.
Permitted final vacuum 0.01 mbar
Maximum leakage rate 0.01 bar/h
Pump control speed control, optimised rinsing procedures for the pump membranes as well as signal output for pump ON/OFF
Connection Vacuum connection with small flange DN16, and gas inlet with fresh air supply

Control technology

adjustable parameters temperature (Celsius or Fahrenheit), pressure (vacuum), programme time, time zones, summertime/wintertime
Language setting German, English, Spanish, French, Polish, Czech, Hungarian, Italian
ControlCOCKPIT TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT the process time does not start until the set temperature is reached

Communication

Interface Ethernet LAN, USB
Documentation programme stored in case of power failure
Programming AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

Safety

Temperature control mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
AutoSAFETY additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
Autodiagnostic system integral fault diagnostics for temperature control
Alarm visual and acoustic

Heating concept

Thermoshelves 1 connection for thermoshelves in the rear
VO cooling Peltier cooling unit ensures a surface temperature distribution with a maximum deviation of ±1 K across the entire temperature range
VO direct heating fuzzy-supported MLC (Multi-Level-Controlling) microprocessor controller adapting its performance to the volume (local temperature sensing)

Standard equipment

Works calibration certificate for +10°C/20 mbar
Interior additional interior mountings of stainless steel, material 1.4404.
Interior all tubings made of stainless steel, material no. 1.4571
Internals Cooling- and heating-combination of aluminium, material 3.3547 (ASTM B209), with integrated cooling circuit as well as large-area heating including local temperature sensing (Pt100, 4-wire-circuit); individual overtemperature protection. Further data see stainless steel interior.

Stainless steel interior

Material hermetically welded stainless steel interior of extremely corrosion-resistant stainless steel, material 1.4404
Volume 29 l
Dimensions w(A) x h(B) x d(C): 385 x 305 x 250 mm
Max. loading of chamber 20 kg

Textured stainless steel casing

Dimensions w(D) x h(E) x d(F): 550 x 607 x 400 mm (d +38mm door handle)
Door full-sight glass door, inside spring-loaded, 15 mm thick glazed panel in safety glass, outside with anti-splitter screen
Housing rear zinc-plated steel

Electrical data

Voltage Electrical load 230 V, 50/60 Hz
approx. 400 W

Ambient conditions

Ambient temperature +5 °C to +40 °C
Set Up The distance between the wall and the rear of the chamber must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from the wall must not be less than 8 cm.
Humidity rh max. 80 %, non-condensing
Overvoltage category II
Pollution degree 2

Packing/shipping data

Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton w x h x d: 830 x 1050 x 800 mm
Net weight approx. 68 kg
Gross weight carton approx. 91 kg

Cooled vacuum oven VO49cool

For gentle drying of bacteria and starter cultures or simulation of intercontinental flights.

Temperature

Working temperature range from 5°C (at least 20 below ambient temperature) to +90°C
Setting temperature range from +5°C up to +90°C
resolution of display for actual values 0.1°C
resolution of display for setpoint values 0,1°C

Pressure (Vacuum)

Vacuum range 5 to 1100 mbar
Pressure control Digital electronic pressure control for a speed-controlled vacuum pump. Tubing for vacuum, air and inert gas are made of material 1.4571 (ASTM 316 Ti). Programmable, digitally controlled inlet for air.
Permitted final vacuum 0.01 mbar
Maximum leakage rate 0.01 bar/h
Pump control speed control, optimised rinsing procedures for the pump membranes as well as signal output for pump ON/OFF
Connection Vacuum connection with small flange DN16, and gas inlet with fresh air supply

Control technology

adjustable parameters temperature (Celsius or Fahrenheit), pressure (vacuum), programme time, time zones, summertime/wintertime
Language setting German, English, Spanish, French, Polish, Czech, Hungarian, Italian
ControlCOCKPIT TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT the process time does not start until the set temperature is reached

Communication

Interface Ethernet LAN, USB
Documentation programme stored in case of power failure
Programming AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

Safety

Temperature control mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
AutoSAFETY additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
Autodiagnostic system integral fault diagnostics for temperature control
Alarm visual and acoustic

Heating concept

Thermoshelves 1 connection for thermoshelves in the rear
VO cooling Peltier cooling unit ensures a surface temperature distribution with a maximum deviation of ±1 K across the entire temperature range
VO direct heating fuzzy-supported MLC (Multi-Level-Controlling) microprocessor controller adapting its performance to the volume (local temperature sensing)

Standard equipment

Works calibration certificate for +10°C/20 mbar
Interior additional interior mountings of stainless steel, material 1.4404.
Interior all tubings made of stainless steel, material no. 1.4571
Internals Cooling- and heating-combination of aluminium, material 3.3547 (ASTM B209), with integrated cooling circuit as well as large-area heating including local temperature sensing (Pt100, 4-wire-circuit); individual overtemperature protection. Further data see stainless steel interior.

Stainless steel interior

Material hermetically welded stainless steel interior of extremely corrosion-resistant stainless steel, material 1.4404
Volume 49 l
Dimensions w(A) x h(B) x d(C): 385 x 385 x 330 mm
Max. loading of chamber 20 kg

Textured stainless steel casing

Dimensions w(D) x h(E) x d(F): 550 x 687 x 430 mm (d +38mm door handle)
Door full-sight glass door, inside spring-loaded, 15 mm thick glazed panel in safety glass, outside with anti-splitter screen
Housing rear zinc-plated steel

Electrical data

Voltage Electrical load 230 V, 50/60 Hz
approx. 500 W

Ambient conditions

Ambient temperature +5 °C to +40 °C
Set Up The distance between the wall and the rear of the chamber must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from the wall must not be less than 8 cm.
Humidity rh max. 80 %, non-condensing
Overvoltage category II
Pollution degree 2

Packing/shipping data

Transport information The appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton w x h x d: 830 x 1050 x 800 mm
Net weight approx. 96 kg
Gross weight carton approx. 119 kg
VACUUM OVEN , MEMMERT
VACUUM OVEN , MEMMERT
เงื่อนไขอื่นๆ
1 ปี
Tags

วิธีการชำระเงิน

บมจ. ธนาคารกสิกรไทย สาขาสัมมากร เพลส รามคำแหง ออมทรัพย์
รายการสั่งซื้อของฉัน
เข้าสู่ระบบด้วย
เข้าสู่ระบบ
สมัครสมาชิก

ยังไม่มีบัญชีเทพ สร้างบัญชีใหม่ ไม่มีค่าใช้จ่าย
สมัครสมาชิก (ฟรี)
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านWONDER LAB GROUP
WONDER LAB GROUP
WONDER LAB GROUP และ บริษัทในเครือ ผู้ผลิต เฟอร์นิเจอร์ห้องปฏิบัติการ ( เฟอร์นิเจอร์แลป , เฟอร์นิเจอร์ห้องทดลอง ) พร้อมอุปกรณ์ประกอบ ตู้ดูดไอพิษสารเคมี ( Fume Hood ) ตู้ปลอดเชื้อ Biosafety Cabinet & Laminar Air Flow รวมทั้งจำหน่ายเครื่องมือวิทยาศาสตร์ต่างๆ อาทิ เครื่องนึ่งฆ่าเชื้อ(Autoclave) ตู้อบลมร้อน (Hot Air Oven) เป็นต้น โดยมีคุณสมบัติที่เหมาะสมกับการใช้งานของลูกค้าในประเทศไทยอีกด้วย เรามีทีมงานฝ่ายขายและช่างที่มีประสบการณ์มากว่า 10 ปี ที่พร้อมให้คำปรึกษาแนะนำ และบริการหลังการขายที่เป็นเลิศ ปัจจุบัน ทางบริษัทฯ ได้มีกลุ่มลูกค้าเพิ่มขึ้นทุกปีอย่างต่อเนื่อง โดยการสร้างความพึงพอใจให้กับกลุ่มลูกค้าที่ทางบริษัทฯ มีโอกาสให้บริการ นอกจากนี้ตลอดระยะเวลาที่ผ่านมาบริษัทฯ ได้ปรับตัว และเพิ่มความหลากหลายของสินค้าและบริการให้เข้ากับความต้องการทางด้านเครื่องมือแพทย์ เครื่องมือวิทยาศาสตร์ ที่มีการเปลี่ยนแปลงอย่างไม่มีที่สิ้นสุด ด้วยการพัฒนาบุคลากร ตลอดจนเทคโนโลยีที่ทันสมัยใหม่ ๆ บริษัทฯ เชื่อว่าการรักษามาตรฐานคุณภาพที่ดี การสร้างทีมงานที่ดี เท่ากับการมีแผนงานธุรกิจที่ดี บุคคลากรของ Wonder Lab ทุกคนมีความมุ่งมั่น และความทุ่มเท เป็นหนึ่งในปัจจัยสำคัญที่ทำให้บริษัทฯ ประสบความสำเร็จ Mission (พันธกิจ) จากประสบการณ์ที่มีมานานกว่าหลายปีกับสินค้าเครื่องมือแพทย์ เครื่องมือวิทยาศาสตร์ ปัจจุบันเราเป็นที่ไว้วางใจของลูกค้าทั้งโรงพยาบาล มหาวิทยาลัย หน่วยงานราชการ และโรงงานทั่วประเทศ ด้วยสินค้าคุณภาพมากมายหลายรายการ เรามีความมุ่งมั่นที่จะพัฒนาเพื่อที่จะให้ท่านสามารถมั่นใจในสินค้าและ บริการของเรา Commitment & Development (การมุ่งมั่นและพัฒนา) บริษัทฯ ได้ให้ความสำคัญในการมุ่งมั่นและพัฒนาสินค้าและผลิตภัณฑ์ การบริการหลังการขายทั้งนี้เพื่อให้บริษัทฯ ได้เติบโตอย่างไม่หยุดนิ่งและก่อให้เกิดประโยชน์ในการอำนวยความสะดวกทางด้านต่างๆแก่ลูกค้าสูงสุด ขณะนี้ทางบริษัทได้เปิดรับสมัครพนักงานขายทั่วประเทศจำนวนหลายอัตรา
เบอร์โทร : 096 88 55 923
อีเมล : sales@wonderlabgr.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม